MPLS Guide MPLS and RSVP-TE
3HE 18686 AAAB TQZZA © 2022 Nokia.
Use subject to Terms available at: www.nokia.com
279
Hello Interval The length of time, in seconds, between the Hello packets that
the router sends on the interface. This value must be the same
for all routers attached to a common network. A value of zero (0)
indicates that the sending of hello messages is disabled. A value
of n/a indicates that the interface is an unnumbered interface.
Hello Timeouts The total number of Hello messages that timed out on this RSVP-
TE interface. A value of n/a indicates that the interface is an
unnumbered interface.
Auth Rx Seq Num The received MD5 sequence number
Auth Key Id The MD5 key identifier
Auth Tx Seq Num The transmitted MD5 sequence number
Auth Win Size The MD5 window size
Refresh Reduc. Indicates whether refresh reduction capabilities are enabled or
disabled
Reliable Deli. Indicates whether reliable delivery is enabled or disabled
Bfd Enabled Indicates whether BFD is enabled or disabled on the RSVP-TE
interface. A value of n/a indicates that BFD is not applicable
because the interface is an unnumbered interface.
Graceful Shut. Indicates whether graceful shutdown is enabled or disabled
ImplicitNullLabel Indicates whether the implicit null label is enabled or disabled
GR helper Indicates whether Graceful-Restart Helper is enabled or disabled
IGP Update
Up Thresholds (%) Indicates up threshold levels for the interface
Down Thresholds (%) Indicates down threshold levels for the interface
IGP Update Pending Indicates whether an IGP update will occur
Next Update Indicates when the next IGP update will be, if there is one
pending
Table 26 Router RSVP-TE Interface Detail Field Descriptions (Continued)
Label Description
To Next Page
Loading...
Need help?
General
