Nokia 7705 SAR-W Series - Page 290

MPLS and RSVP-TE
290
MPLS Guide
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com
3HE 18686 AAAB TQZZA
lsp-egress-stats
Syntax lsp-egress-stats lsp lsp-name [interval seconds] [repeat repeat] [absolute | rate]
Context monitor>router>mpls
Description This command monitors MPLS LSP egress statistics at the configured interval until the
configured count is reached.
Default no lsp-egress-stats
Parameters lsp-name — the LSP name
seconds — configures the interval for each display in seconds
Values 3 to 60
Default 10
repeat — configures how many times the command is repeated
Values 1 to 999
Default 10
absolute — displays raw statistics, without processing. No calculations are performed
on the delta or rate statistics.
rate — displays the rate per second for each statistic instead of the delta
Output The following output is an example of LSP egress statistical information.
Output Example
===============================================================================
Monitor ingress statistics for MPLS LSP "toNodeA_1"
===============================================================================
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
LSP Name : toNodeA_1
Sender : 10.10.10.29
-------------------------------------------------------------------------------
Collect Stats : Disabled Accting Plcy. : None
Adm State : Up PSB Match : True
FC BE
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC L2
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC AF
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC L1
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0