Label Distribution Protocol
458
MPLS Guide
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com
3HE 18686 AAAB TQZZA
fec-prefix
Syntax [no] fec-prefix ip-prefix[/mask]
Context config>router>ldp>egress-statistics
Description This command configures statistics in the egress data path at the ingress LER or LSR for an
LDP FEC. The user must also execute the no shutdown command in this context to enable
statistics collection.
The no form of this command disables the statistics in the egress data path and removes the
accounting policy association from the LDP FEC.
Default n/a
Parameters ip-prefix[/mask] — the IP prefix and prefix length associated with the prefix FEC
Values
accounting-policy
Syntax accounting-policy policy-id
no accounting-policy
Context config>router>ldp>egr-stats>fec-prefix
Description This command associates an accounting policy with an LDP FEC. Only one accounting policy
at a time can be associated with an LDP FEC on a particular node.
An accounting policy must first be configured in the config>log>accounting-policy context
before it can be associated; otherwise an error message is generated.
The no form of this command removes the accounting policy association.
Default no accounting policy
Parameters policy-id — the accounting policy ID
Values 1 to 99
ipv4-prefix: a.b.c.d
ipv4-prefix-length: 32
ipv6-prefix: x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x - [0 to FFFF]H
d - [0 to 255]D
ipv6-prefix-length: 128
To Next Page
Loading...
