MPLS Guide Label Distribution Protocol
3HE 18686 AAAB TQZZA © 2022 Nokia.
Use subject to Terms available at: www.nokia.com
475
5.12.2.1.4 Session Parameters Commands
session-parameters
Syntax session-parameters
Context config>router>ldp
Description This command enables the context to configure peer-specific parameters.
peer
Syntax [no] peer ip-address
Context config>router>ldp>session-params
Description This command configures parameters for an LDP peer.
Default n/a
Parameters ip-address — specifies the LDP peer in dotted-decimal notation
export-addresses
Syntax export-addresses policy-name [policy-name...(up to 5 max)]
no export-addresses
Context config>router>ldp>session-params>peer
Description This command specifies the export prefix policy to local addresses advertised to this peer.
Policies are configured in the config>router>policy-options context. A maximum of five
policy names can be specified.
The no form of the command removes the policy from the configuration.
Default no export-addresses
Parameters policy-name — The export prefix route policy name. Allowed values are any string up to
32 characters long composed of printable, 7-bit ASCII characters excluding double
quotes. If the string contains spaces, use double quotes to delimit the start and end
of the string. The specified name(s) must already be defined.
To Next Page
Loading...
