nord modular G2 - Page 145

To Next Page

To Previous Page

NORD MODULAR G2 V1.1 11. Module reference: LFO group

Page 141

1/96

1/96 1/96

1/96

This yellow output transmits 96 clock pulses per note (or 24 clock pulses for each quarter note).

Signal: Logic.

1/16

1/16 1/16

1/16

This yellow output transmits 16 clock pulses per note (or 4 clock pulses for each quarter note).

Signal: Logic.

This yellow output provides you with a logic pulse, which is calculated from the Clock signal, at a rate

set by the ‘Sync every nn beats’ parameter mentioned above. The Sync function provides a method of

telling the Nord Modular G2 sequencer modules where the first beat in a bar is. Patch this output to the

Rst (reset) input of the sequencer modules. This function is absolutely essential to use if you plan to syn-

chronize patches in different slots to each other, or if you want to synchronize Nord Modular G2 to an

external sequencer. Signal: Logic.

• Try to make a habit out of always using this function if you are using more than one sequencer module

in a patch, especially if you want to mix modules clocked with e.g. triplet resolutions with other mod-

ules clocked with eighth or sixteenth notes.