Spray Gun Preset Settings
5-16
Part 1056418-07
E 2019 Nordson Corporation
Perfect Pickoff Example
See Figure 5-12. Lead = 0, Lag = 0. The guns start spraying at leading
edge of the part and stop at the trailing edge.
Conveyor Direction
Lead = 0
Gun On
Lag = 0
Gun Off
Figure 5-12 Perfect Pickoff
Extended Spray Example
Use extended spray to wrap powder around the leading and trailing edges
of parts.
See Figure 5-13. Lead = 5, Lag = 5. The guns start spraying 5 units
BEFORE the leading edge of the part reaches the guns, and stop spraying
5 units AFTER the trailing edge of the part passes the gun.
Conveyor Direction
Lead = 5
Gun On
Lag = 5
Gun Off
Figure 5-13 Extended Spray
To Next Page
Loading...