Nordson iControl Series - Positioner Configuration; Positioner Configuration Screen; Positioner Configuration Settings List

Ethernet and Gun Mover Configuration
4-8
Part 1056418-07
E 2019 Nordson Corporation
Positioner Configuration
See Figure 4-1. Touch the Configure button on the System Configuration
screen to open the Positioner Configuration screen. The positioners are
used to move the spray guns either horizontally or vertically.
1
2
3
4
5
6
7
8
9
10 11 1213 14 15 16
17
18
19
20
21
22
23
24
28
27 26 25
2
(Vertical Positioner)
Figure 4-5 Positioner Configuration Screen
1. Mode Indicator
2. Positioner Orientation
3. Auto Mode
4. Manual Mode
5. Off Mode
6. Positioner Selector
7. Off Lock
8. Pickoff
9. Keypad
10. Jog Buttons
11. Gun Separation
12. Gun to Conveyor Centerline
13. Park/Clean Position
14. Retract Position
15. Hysteresis
16. Encoder Resolution (Nordson
Only)
17. Lance option
18. USA ColorMax Booth option
19. Vertical Positioner option
20. No Drive Encoder option
21. Clean Only option
22. Lockout Override
23. Default Move Settings
24. Minimum Move Settings
25. Gun to Part Setting
26. Lag Setting
27. Lead Setting
28. Actual Position