Ethernet and Gun Mover Configuration
4-2
Part 1056418-07
E 2019 Nordson Corporation
Introduction
For most configuration tasks you must be logged in as a level 4 user. Some
configuration tasks are reserved for Nordson CSRs or engineers.
NOTE: The configuration process for positioners and reciprocators includes
setting default move settings that apply to all parts. If part-specific settings
are required, create positioner and reciprocator presets as described in
Sections 6 and 7 of this manual.
System Configuration Screen
Touch the Configure button on the Main screen button bar to
open the System Configuration screen.
IMPORTANT: You must configure the Ethernet network before you can
configure the positioners, reciprocators, and analog scanners.
Positioners Network
Photoeye/
Scanner
Reciprocators
Figure 4-1 System Configuration Screen
Note: Grayed-out items on your screen require a specific user login, are not applicable to your application, or are
features not yet available.
To Next Page
Loading...