Monitoring Operation
9-4
Part 1056418-07
E 2019 Nordson Corporation
Global Hourmeter
See Figure 9-1. To open the Global Hourmeter screen, touch the Global
Hourmeter button on the Global Status screen.
See Figure 9-2. The Global Hourmeter screen shows you the Hours On
since the last maintenance reset, the Maintenance Timer setting, and the
Total Hours On, for 16 pumps and 16 guns at a time.
NOTE: For Prodigy systems, pumps also have a maintenance timer.
When the Hours On timer equals the Maintenance Timer setting, an alarm is
turned on and you are prompted to perform maintenance.
When the required maintenance is complete, reset the timer by touching the
gun reset button.
Hours On
Pumps Guns
Timer
Reset
Total Hours On
Maintenance
Timer
Figure 9-2 Global Hourmeter
To Next Page
Loading...