Nordson iControl Series - Reciprocator Lap Calculator; Reciprocator Lap Calculator Purpose; Lap Calculator Settings and Results

Operation
8-17
Part 1056418-07
E 2019 Nordson Corporation
Fixed Mode − Expanded
Variable Mode − Expanded
Gun On Downstroke
Gun Off Upstroke
Gun Off Downstroke
Gun On Upstroke
Speed (Only if not synchronized)
Top Turn-Around
Bottom Turn-Around
Settings Adjust − Touch to Expand Screen
Stroke
Length
Settings Adjust − Touch to Expand Screen
Top Overtravel
Bottom Overtravel
Speed (Only if not synchronized)
Turn−Around Points
(Not adjustable from this
screen)
Figure 8-12 Reciprocator Default or Preset Settings
Reciprocator Lap Calculator
The Lap Calculator allows you to experiment with the results of different
reciprocator settings.
NOTE: The settings you enter on this screen do not change your
reciprocator settings. Use this screen for reference only.
Settings: The settings for conveyor speed, overtravel, and part height can
be automatic (taken from the actual conveyor speed and current default or
preset settings) or manual (entered manually on this screen).
Results: The results data can also be displayed automatically or manually.
If you choose Manual, and change a setting, touch the Calculate button to
update the results data. Touching the Lap Patterns provides access to the
Lap Pattern screens, the first shows the lap pattern without fan width data;
the other shows the lap pattern with the fan width included.