Ethernet and Gun Mover Configuration
4-4
Part 1056418-07
E 2019 Nordson Corporation
Host Configuration
Touch the Host Configuration button on the Network Status screen to
open the Host Configuration screen (Figure 4-3).
Remote I/O Network: Set the IP address for the iControl Console in the
Remote I/O Network section.
Recommended host addresses:
1st booth: 192.162.1.1
2nd booth: 192.162.1.2
and so on.
The Mask should always be set to 255.255.255.0.
NOTE: Newer versions of the software provide auto-addressing to ensure
address conflicts are handled correctly. This feature attempts to set the first
booth powered on to 192.162.1.1, the next to 192.162.1.2, and so on up to
192.162.1.5. The software attempts to resolve any address conflicts
automatically.
LAN Network: This feature is not active at this time.
iControl Console Address
Customer LAN Settings
(Future Release)
Figure 4-3 Host Configuration Screen
To Next Page
Loading...