Operation
8-16
Part 1056418-07
E 2019 Nordson Corporation
Control Screen Indicators and Functions (contd)
Auto
Manual
Off
Jog
Current Position
Lap Calculator
Top Soft Limit
Manual Lock
Off Lock
Mode Indicator
Main Screen
Reciprocator Buttons
Lockout
Indicator
Bottom
Soft Limit
Home
Default Settings
Preset Settings
Speed
Motion Mode
Motion Mode Icons:
Fixed Synchronized*
Variable Synchronized*
Fixed No Synchronization
Variable No Synchronization
* Reciprocator Speed Syn-
chronized with
Conveyor Speed
Figure 8-11 Reciprocator Control Screen
Default and Preset Setting Adjustments
The Default Settings or Preset Settings button appears depending on the
part currently in front of the guns:
S If no preset settings exist for the current part, then the default settings
are used and the Default Settings button displays. Touching the button
expands the screen to show the default settings.
S If preset settings exist for the current part, then the Preset Settings
button displays. Touching the button opens the Preset Settings screen.
Refer to Section 7, Reciprocator Preset Settings for detailed information
on the preset settings and their effect on reciprocator movement.
The settings displayed depend on the mode selected in the reciprocator
configuration: Fixed or Variable. Figure 8-12 lists the settings. The settings
can be adjusted as desired.
NOTE: If the reciprocator mode is synchronized with conveyor speed
(green conveyor in mode icon) then the reciprocator speed cannot be
adjusted.
To Next Page
Loading...