Standard System Configuration
3-7
Part 1056418-07
E 2019 Nordson Corporation
System Restart
Changes to the default gun type or number of guns require a system restart.
Theses changes disable the Close button and enable the Shutdown
button. Changing the flow limit does not require a system restart.
To restart the system:
1. Touch the Shutdown button.
2. A dialog box is displayed with the following choices:
S Logout (End Photon session)
S Shut down system
S Shut down and reboot
3. Choose Shut down and reboot then touch the OK button. Allow the
system to reboot.
Refer to Program Shutdown on page 3-33 for a description of the shutdown
procedure.
To Next Page
Loading...