Parts
7-3
Part 1120277_01
E 2012 Nordson Corporation
Melter Part Numbers
See Figure 7-1. You will need to know the configuration of your melter when
requesting service or ordering spare parts and optional equipment. The
melter part number is stamped on the melter identification plate. Refer to this
parts list and to Melter Configuration Code in Section 8, Technical Data,as
needed to determine the configuration of your melter.
NOTE: The following table is not a complete list of melter configurations. As
new configurations are ordered, additional melter part numbers will be
created. Contact your Nordson representative for information on configuring
a PURBlue 4 high-output melter.
Part Number Configuration Code Description
1120260 PURBLUE4-A1EM/FXXXX-HO
MELTER, PB4, 240V, 130HOP, 3H/G, PR12M1
(pressure control option F)
1120285 PURBLUE4-A1FM/FXXXX-HO
MELTER, PB4, 240V, 130HOP, 3H/G, PR12M2
(pressure control option F)
1120286 PURBLUE4-A1FM/XXXXX-HO
MELTER, PB4, 240V, 130HOP, 3H/G, PR12M2
(standard pressure control option)
NOTE: All melters have three hoses/guns and include installation (ship-with) kit part number 1120276.
Refer to Section 3, Installation, for the contents of the installation kit.
Figure 7-1 Unit identification plate
To Next Page
Loading...
