Nordson PURBlue 4 - Installing Optional Equipment; Connecting a Gun Driver, Pattern Controller, or Timer; Flushing the Melter

Installation
3-46
Part 1120277_01
E 2012 Nordson Corporation
Installing Optional Equipment
Each item of optional equipment is shipped with instructions for installing and
operating the equipment. Refer to Section 7, Parts, for equipment part
numbers.
Connecting a Gun Driver, Pattern Controller, or
Timer
If applicable, complete the melter installation by connecting the guns to the
desired gun driver, pattern control, or timer. Refer to the product manual
provided with the device for information about installing and operating the
equipment.
Flushing the Melter
Flush the melter before initial operation. Refer to Flushing the Melter in
Section 5, Maintenance.
Refer to Section 4, Operation, for information about filling the hopper and
operating the melter.