Parts
7-19
Part 1120277_01
E 2012 Nordson Corporation
Pressure Control Option Parts
Your melter will have one of the following types of pressure control: manual
PCV or flow control bypass. Refer to Melter Part Numbers earlier in this
section to determine the configuration of your melter.
NOTE: If you want to change the type of pressure control used on your
melter, order the appropriate service kit shown in these parts lists. Each
option may be field-retrofitted.
Manual PCV (X Option)
SeeFigure7-10.
Item Part Description Quantity Note
1 1031222 S SVCE KIT, DURABLUE, PCV, 1100 PSI 1 A
NOTE A: Order this kit to change to this pressure control option.
1
Figure 7-10 Manual PCV
To Next Page
Loading...
