Technical Data
8-1
Part 1120277_01
E 2012 Nordson Corporation
Section 8
Technical Data
General Specifications
Item Data Note
Weight of empty melter 100 kg (221 lb)
Weight of melter with full reservoir 104 kg (230 lb)
Hydraulic hose ports 3
Melt rate (at nominal voltage) 6.5kg/hr(14lb/hr) A
Noise 64dB (A) at maximum pump speed B
Workplace temperature 0to40C (32 to 104 F)
Pump speed 7-69 rpm C
NOTE A: Varies depending on the type of adhesive used.
B: The noise level is measured at a distance of 1 m (3.3 ft.) from the surface of the melter.
C: For displacement information, refer to Motor and Pump Specifications.
Motor and Pump Specifications
Item Data Note
Viscosity range 45,000 cps
Maximum hydraulic pressure 75 bar (1100 psi)
Displacement
PR12M1 pump: 1.86 cc/rev
PR12M2 pump: 3.71 cc/rev
To Next Page
Loading...
