Nordson PURBlue 4 - Page 230

Operating Parameters
B-12
Part 1120277_01
E 2012 Nordson Corporation
29 Internal Zone Temperature Offset
Description: The difference in t he number of degrees by which the melter's
internal zones will operate. If this parameter is used, the primary
internal zone will operate at a lower temperature than the
secondary internal zone as determined by the value of this
parameter.
Value: 0 _Cto-15_C(0_Fto-30_F)
Resolution: 1 _C
1 _F
Default Value: 0
Format: —
Use: Melter internal zones are designated as follows:
DuraBlue D10/D16: primary=reservoir; secondary=pump
DuraBlue D4L/D10L/D16L: primary=reservoir; secondary=pump
AltaBlue TT: primary=reservoir; secondary=pump
DuraBlue 25/50/100: primary=melt plate; secondary=reservoir
AltaBlue 15/30/50/100: primary=melt plate; secondary=reservoir
DuraDrum: primary=platen; secondary=pump
PURBlue: 4 primary=reservoir; secondary=manifold;
tertiary=melt plate