Installation
3-17
Part 1120277_01
E 2012 Nordson Corporation
P/N 1030542
Figure 3-6 Connecting a switched handgun hose or footsw itch
To connect guns
Observe the following guidelines:
S For information about choosing the most appropriate Nordson hot melt
gun for your manufacturing process, refer to the latest edition of
Nordson's hot melt dispensing equipment Replacement Parts Catalog or
contact your Nordson representative. Refer to Appendix A, Calculating
Melter Power Requirements, for information about how to calculate the
power required by Nordson hot melt guns.
S Refer to the user's guide that is shipped with each gun for information
about installing the gun and connecting a hose to the gun.
To Next Page
Loading...
