Nordson PURBlue 4 - Page 57

Installation
3-27
Part 1120277_01
E 2012 Nordson Corporation
Table 3-6 Operating Parameters (contd)
Parameter Name Range of Values Default Value
Seven-day Clock
50
Current Day 1to7(1=Monday) —
51
Current Hour 0000 to 2359 —
55
Schedule 1 Heaters On 0000 to 2359 06:00
56
Schedule 1 Heaters Off 0000 to 2359 17:00
57
Schedule 1 Enter Standby 0000 to 2359 —:—
58
Schedule 1 Ex it Standby 0000 to 2359 —:—
60
Schedule 2 Heaters On 0000 to 2359 —:—
61
Schedule 2 Heaters Off 0000 to 2359 —:—
62
Schedule 2 Enter Standby 0000 to 2359 —:—
63
Schedule 2 Ex it Standby 0000 to 2359 —:—
65
Schedule 3 Heaters On 0000 to 2359 —:—
66
Schedule 3 Heaters Off 0000 to 2359 —:—
67
Schedule 3 Enter Standby 0000 to 2359 —:—
68
Schedule 3 Ex it Standby 0000 to 2359 —:—
71
Schedule for M onday 0-7 0
72
Schedule for Tuesday 0-7 0
73
Schedule for Wednesday 0-7 0
74
Schedule for Thursday 0-7 0
75
Schedule for Friday 0-7 0
76
Schedule for Saturday 0-7 0
77
Schedule for Sunday 0-7 0
Automatic Fill Timer
78
Automatic F ill Timer 0-99 seconds 0 (Disabled)
PID Selection
80-91
PID Selection for Hose/Gun
Receptacles
0-3 0or1
NOTE: Motor control parameters are set differently from operating
parameters. Refer to Setting Up the Motor Control later in this section. Some
applications will require a change to one or more motor control parameters.