— i —
Conformity to the International Safety Regulations
The Megatorque Motor Systems conform to the EC Directives (CE Marking) and Underwriters’ Laboratory
(UL) regulations.
1. Conformity to the EC Directives
The Megatorque Motor System is a machine component that conforms to provisions of the EC Low Voltage
Directive. This will help a user in easy conformity with the EC Directives (CE marking) of a machine into
which the Megatorque Motor System is incorporated.
1.1. Conformity to Electromagnetic Compatibility Directive
A sample of the Megatorque Motor System has been tested under specific conditions of the Motor and the
Driver Unit in terms of their combination, installing distance and wiring routing. However, your actual use
conditions for wiring and installations won’t be the same as our tested sample, and because of this reason,
you have to check your machine, especially on electro-radiation disturbance and terminal distance voltage,
for the conformity to EMC Directive as a complete machine after installation of the Megatorque Motor
System.
n List of relevant standards
Item Conformity with European standards
Relevant
EC Directive
Megatorque Motor
EN60034-1
EN50178
Low Voltage
Directive
EN61800-3 : Adjustable speed electrical power drive system
EN61000-3-3 : Class5
Harmonic voltage and fluctuation
EN61000-4-2 : Electro static discharge
EN61000-4-3 : Radio-frequency electromagnetic field
EN61000-4-4 : Electric fast transit burst
EN61000-4-5 : Lightening surges
Motor / Driver Unit
EN61000-4-6 : Radiofrequency conducted disturbance
Electromagnetic
Compatibility
Directive
To Next Page
Loading...