MS51
Nov. 28, 2019 Page 309 of 491 Rev 1.00
MS51 32K SERIES TECHNICAL REFERENCE MANUAL
CAPCON2 – Input Capture Control 2
Enable noise filer on input capture 2
0 = Noise filter on input capture channel 2 Disabled.
1 = Noise filter on input capture channel 2 Enabled.
Enable noise filer on input capture 1
0 = Noise filter on input capture channel 1 Disabled.
1 = Noise filter on input capture channel 1 Enabled.
Enable noise filer on input capture 0
0 = Noise filter on input capture channel 0 Disabled.
1 = Noise filter on input capture channel 0 Enabled.