NXP Semiconductors QorIQ LX2160A - 3.39 Reset Force 3 (RST_FORCE3)

3.38.2 Function
Asserts selected reset sources. See RST_FORCE1 for details.
3.38.3 Diagram
Bits
7 6 5 4 3 2 1 0
R
EPHY2 EPHY1 PHY10 PHY25 PHY40 TRST HRST PORST
W
GRST 0 0 0 0 0 0 0 0
3.38.4 Fields
Field Function
7
EPHY2
1= Assert RST_EPHY2_B for the RealTek PHY #2.
6
EPHY1
1= Assert RST_EPHY1_B for the RealTek PHY #1.
5
PHY10
1= Assert RST_PHY_10G_B to the Aquantia AQR107 10Gbps PHY.
4
PHY25
1= Assert RST_PHY_25G_B to the 25Gbps retimer.
3
PHY40
1= Assert RST_PHY_40G_B to the CS4223 40GE PHY.
2
TRST
1= Assert DUT_TRST_B.
1
HRST
1= Assert DUT_HRESET_B.
NOTE: This bit only asserts the signal to the DUT; it is not intended to be used as a general system reset.
0
PORST
1= Assert DUT_PORESET_B.
NOTE: This bit only asserts the signal to the DUT; it is not intended to be used as a general system reset.
3.39 Reset Force 3 (RST_FORCE3)
Chapter 3 Qixis Programming Model
QorIQ LX2160A Reference Design Board Reference Manual, Rev. 0, 09/2018
NXP Semiconductors 103