NXP Semiconductors QorIQ LX2160A - 3.9 Control and Status Registers

Note: for harmonization with QDS-supporting code (e.g. uboot), if MINOR is zero, do
not print it.
Other information can be obtained by writing the corresponding address and reading the
register. Reserved fields are found only in QDS QTAG but are present for compatibility.
Contents are as follows:
3.8.2 MINTAG Definition
Address
Range
Name Definition
0x00-0x03 TAG not implemented.
0x05-0x06 MINOR Minor build version: u16 value in little-endian order.
0x08-0x0B DATE Date/time stamp: u32 Unix GMT time value in big-endian order.
0x0C RELEASE Released flag: 0=unreleased, non-zero=released.
0x10-0x2F NAME not implemented.
0x30-7F reserved reserved
3.8.4 Diagram
Bits
7 6 5 4 3 2 1 0
R
MINOR
W
NONE
05h
3.8.5 Fields
Field Function
7-0
MINOR
Read: Data to read from MINOR/MINTAG.
Write: Address of data to read.
3.9 Control and Status Registers
Chapter 3 Qixis Programming Model
QorIQ LX2160A Reference Design Board Reference Manual, Rev. 0, 09/2018
NXP Semiconductors 73