NXP Semiconductors QorIQ LX2160A - 3.35 Reset Status (RST_STAT)

Field Function
RST 0= Reset sequencer operates normally.
1= Upon transition from 0 to 1, restart the reset sequence.
3.35 Reset Status (RST_STAT)
3.35.1 Address
Register Offset
RST_STAT 041h
3.35.2 Function
The RST_STAT register reports the current status of various reset-related signals.
3.35.3 Diagram
Bits
7 6 5 4 3 2 1 0
R WAIT SYSRST HRST PORST RREQ
W
NONE 0 0 000 0 0 0
3.35.4 Fields
Field Function
7
WAIT
Reset Waiting:
0= Reset sequencer is operating normally.
1= Reset sequencer is in RMT-WAIT state, waiting for permission to proceed.
6
SYSRST
System Reset:
0= System is operating normally.
1= System is in reset.
Table continues on the next page...
Chapter 3 Qixis Programming Model
QorIQ LX2160A Reference Design Board Reference Manual, Rev. 0, 09/2018
NXP Semiconductors 99