NXP Semiconductors QorIQ LX2160A - 3.34 Reset Control (RST_CTL)

The reset control register group handles reset behavior configuration and general
monitoring of resets.
3.34 Reset Control (RST_CTL)
3.34.1 Address
Register Offset
RST_CTL 040h
3.34.2 Function
The RST_CTL register is used configure or trigger reset actions.
3.34.3 Diagram
Bits
7 6 5 4 3 2 1 0
R
REQMD RST
W
CRST
00 SW_RST_MODE 000 0
3.34.4 Fields
Field Function
7-6
-
Reserved.
5-4
REQMD
00= Disabled - do nothing.
01= reserved
10= reserved
11= Normal - assert PORESET_B to DUT to begin normal reset sequence.
3-1
-
Reserved.
0 Reset:
Reset Control (RST_CTL)
QorIQ LX2160A Reference Design Board Reference Manual, Rev. 0, 09/2018
98 NXP Semiconductors