NXP Semiconductors QorIQ LX2160A - 3.60 Interrupt Control 2 (IRQCTL2)

Field Function
IRQ1 00= Level-sensitive: drive IRQ1 low on interrupt input == 1.
01= Level-sensitive: drive IRQ1 high on interrupt input == 1.
10= Edge-triggered: drive IRQ1 low on a 0-to-1 edge.
11= Edge-triggered: drive IRQ1 high on a 0-to-1 edge.
Edge-triggered interrupts are cleared by reading the IRQCTL0 register.
3-2
-
Reserved.
1-0
-
Reserved.
3.60 Interrupt Control 2 (IRQCTL2)
3.60.1 Address
Register Offset
IRQCTL2 096h
3.60.2 Function
The IRQCTL2 register allows defining interrupt output modes for IRQ[8:11], where
relevant to the target system.
3.60.3 Diagram
Bits
7 6 5 4 3 2 1 0
R
IRQ9 IRQ10
W
CRST 00 00 00 00
Interrupt Control 2 (IRQCTL2)
QorIQ LX2160A Reference Design Board Reference Manual, Rev. 0, 09/2018
124 NXP Semiconductors