NXP Semiconductors QorIQ LX2160A - 3.53 DUT Configuration 6 (DUTCFG6)

Field Function
-
2-1
SVR10
Controls System Version (config cfg_svr[1:0]):
XX= Selected processor variant (refer to the device Reference Manual).
NOTE: SVR settings must match installed device.
0
TEST
Controls Test Select (config TEST_SEL_B):
X= Test-mode selection.
NOTE: Unlike all other DUTCFG bits, TEST_SEL_B is always driven.
3.53 DUT Configuration 6 (DUTCFG6)
3.53.1 Address
Register Offset
DUTCFG6 066h
3.53.2 Function
The DUTCFG6 register is used to sample device-specific test modes.
3.53.3 Diagram
Bits
7 6 5 4 3 2 1 0
R
SOCUSE
W
RRST
1 111111
SW_SOCUS
E
3.53.4 Fields
Field Function
7 Reserved.
Table continues on the next page...
Chapter 3 Qixis Programming Model
QorIQ LX2160A Reference Design Board Reference Manual, Rev. 0, 09/2018
NXP Semiconductors 117