5-7
CHAPTER 5 DRAWINGS AND PARTS LISTS
5.2.3 Precision Top Loader Base Parts List
TABLE 5-3. PRECISION TOP LOADER BASE PARTS LIST (See Figure 5-3)
KEY NO. PART NO. DESCRIPTION
2 11108720 Pan Support, 6.8" x 6.8" & 8" x 8", Explorer, Voyager, Explorer Pro
7 11108412 Cable, Display, Explorer, Voyager, Explorer Pro
10 11108708 Calibration Mechanism, Explorer, Voyager, Explorer Pro
11 11108712 Main PCB Assembly, Explorer, Voyager, Explorer Pro
12 498000-014 IC, PSD, U11, Explorer, Voyager, Explorer Pro
13 400103-030 Calibration Weight, 610g, 800g, 2100g, 4100g, 4100g/1000g, 6100g,
8100g, Explorer, Voyager, Explorer Pro
13 400103-020 Calibration Weight, 210g, 410g, 500g, 410g/100g, Explorer, Voyager,
Explorer Pro
13 400103-010 Calibration Weight, 62g, 110g, 200g, 210g, 210g/100g, Explorer, Voyager,
Explorer Pro
14 76580-21 Standoff, Explorer, Voyager, Explorer Pro
16 400102-010 Weight Arm, Explorer, Voyager
18 11108101 Base, Machined, Explorer, Voyager, Explorer Pro
18 11136101 Base, Machined (Analytical) Explorer, Voyager
19 11108104 Foot, Explorer, Voyager, Explorer Pro
20 00215053 Level, Explorer, Voyager, Explorer Pro
21 00380035 Label, FCC, Explorer, Voyager, Explorer Pro
22 3263-00 Knob Plate, Explorer, Voyager, Explorer Pro
NOTES: 1. In all cases where a part is replaced, the balance shall be thoroughly
checked after the replacement is made. The balance must meet the
parameters of all applicable specifications in this manual.
2. Ohaus replacement parts warranty only applies to parts purchased
from Ohaus Corporation.
To Next Page
Loading...
