Oki C9600hdn

Configuration: Configurable Items • 107
SMTP-18
Enable/disable sending an E-mail when a service call request
occurs.
SMTP-19
.Enable/disable sending an E-mail when a finisher error occurs.
AdminManager
By EVENT: [Setup] → [OKI Device Setup] → [E-mail(Send] →
[Destination Address] → [1…–5…] → [Notify Mode = EVENT] →
[Event Mode] → [Other Error = ON or NoWait]
By PERIOD: [Setup] → [OKI Device Setup] → [E-mail(Send] →
[Destination Address] → [1…–5…] → [ Notify Mode = PERIOD] →
[Other Error = ON]
Web Browser
[Network] → [Email] → [Alert Settings] → [View a Summary
…] → [Table below] → [Other]
TELNET
[Setup SMTP (E-mail)] → [Event to address 1–5] → [Service Call Req.]
AdminManager
By EVENT: [Setup] → [OKI Device Setup] → [E-mail(Send] →
[Destination Address] → [1…–5…] → [Notify Mode = EVENT] →
[Event Mode] → [Printing Error = ON or NoWait]
By PERIOD: [Setup] → [OKI Device Setup] → [E-mail(Send] →
[Destination Address] → [1…–5…] → [ Period Mode = PERIOD] →
[Printing Error = ON]
Web Browser
Not applicable.
TELNET
[Setup SMTP (E-mail)] → [Event to address 1–5] → [Finisher]