Configuration: Configurable Items • 98
Trap-18
Set the network address to which a trap packet is sent. Any address.
Default is 00000000000
.
SMTP
SMTP-1
Enable/disable receiving E-mail via SMTP.
AdminManager
[Setup] → [OKI Device Setup] → [SNMP] → [Printer Trap Setup
…] → [IPX]
Web Browser
[Network] → [SNMP Trap] → [STEP2. Set Printer Trap
Address] → [IPX]
TELNET
[Setup printer trap] → [Setup IPX trap] → [IPX Trap net]
NOTE
The default setting is underlined.
AdminManager
[Setup] → [OKI Device Setup] → [E-mail(Receive)] → [Use SMTP
Receive]
Web Browser
[Network] → [Email] → [Receive Settings] → [SMTP] → [To
STEP2] → [Domain FIlter]
TELNET
[Setup SMTP (E-mail)] → [SMTP Transmit]
To Next Page
Loading...
Need help?
General
