Troubleshooting: Self-Diagnostic Test • 208
Troubleshooting:
Self-Diagnostic Test
Printer does not print.
Ensure the printer emulation is set to PS (if available) or Automatic.
NG is printed in the Self-diagnostic test.
• Confirm that the NIC is installed correctly and turn the printer off
and on again.
• Ensure the network cable is correctly connected.
• Connect to a different network segment, rerun the test and see if
this fixes the problem.
EEPROM Check registers NG.
• Confirm that the NIC is installed correctly and turn the printer off
and on again.
• Initialize the NIC.
To Next Page
Loading...
