Security Features: Unused Protocols • 152
Security Features:
Unused Protocols
Disabling Unused Protocols
Disabling unused protocols prevents access to the print server
through those protocols.
The easiest way to disable unused protocols is to use the Web
Browser.
1. Open the web browser.
2. Enter the print server’s IP Address:
Internet Explorer
Enter the print server’s IP Address in the [Address] field.
Netscape Navigator
Enter the print server’s IP Address in the [Location/Position]
field.
3. Press the ENTER key.
The Printer Status window appears.
4. Click the [Security] tab.
NOTE
You can also launch the web browser from within the
AdminManager utility. To do this, highlight the appropriate
print server, then click [Setup] → [Setup by HTTP]:
To Next Page
Loading...
Need help?
General
