234
Print Setup
Item Value Description
Personality Auto
PostScript
PCL
IBM PPR
EPSON FX
Selects a printer language.
Copies 1 ~ 999 Sets number of copies. Disabled
for local print, except for demo
data.
Duplex ON
OFF
Specifies duplex printing.
Binding LongEdge
ShortEdge
Specifies how to bind duplex
printing.
Job offset ON
OFF
Enables/Disables Job offset.
Output bin Facedown
Faceup
Specifies where to eject prints.
Facedown
Finisher
Specifies where to eject prints
when a Finisher is installed.
Finisher Setup
This appears only if the optional finisher is installed. See the documentation
supplied with the finisher for information on setting it up.
Media check Enable
Disable
Enables/Disables whether the
printer checks that paper size
required by the print data
matches that of the tray. Only
standard sizes can be checked.
Transparency
detect
Auto
Disable
Enables/Disables the automatic
detection of transparencies. (Use
it while detecting sensor
mistakes).
Resolution 600dpi
600x1200dpi
600dpi multi-level
Sets the resolution.
To Next Page
Loading...
Need help?
General
