Printing from Windows: Using NetBEUI Protocol • 169
Installing NetBEUI Protocol
Installing NetBEUI Protocol
Windows XP
Although you can install the NetBEUI protocol into Windows XP, it is
not supported. You should be able to use NetBEUI on LAN
connections although you will not be able to use this on Remote
Access Service Connections.
1. Click [Start] → [Settings] → [Control Panel].
2. Double-click [Network Connections].
3. Right-click the adapter to which you wish to add NetBEUI.
4. Click [Properties].
5. On the [General] tab, click [Install].
6. Click [Protocol] → [Add].
7. Click [Have Disk] and insert your Windows XP CD.
8. Open the Valueadd\msft\net\netbeui folder, click the Netnbf.inf
file and then click [Open].
Installing NetBEUI Protocol
Windows 2000
1. Click [Start] → [Settings] → [Network and Dial-up Connections].
2. Double-click the [Local Area Connection] icon.
3. Click [Properties].
The "Local Area Connection Properties" window appears.
4. If [NetBEUI Protocol] is not listed, click [Install].
5. Click [Protocol] → [Add].
The "Select Network Protocol" window appears.
6. Click [NetBEUI Protocol] → [OK].
7. Click [Close].
8. Click [Close].
To Next Page
Loading...
Need help?
General
