Configuration: Using TELNET • 57
Configuration:
Using TELNET
Example TELNET Configuration, Sun
Solaris 2.4
TELNET requires the print server to have a valid IP address
configured. If the NIC already has an IP address configured, skip
steps 1 to 3 below.
1. Login as [root].
If you do not have Superuser rights, the network manager
should run the configuration.
Important!
Please ensure that a valid IP address for you network
environment is used. Use of an incorrect IP address can cause
serious problems on your network.
NOTE
The method of configuring commands may differ
between workstations. Refer to the workstation’s
manual.
To Next Page
Loading...
Need help?
General
