Printing from Novell Netware: Setup • 176
Printing from Novell Netware:
Setup
First, Print the Self-Diagnostic Test
The print server’s self-diagnostic printout provides information that is
required for NetWare configuration.
To generate the printout, press the Test button on the print server for
more than three seconds and release.
The Ethernet address (MAC Address) is found under “TCP/IP
Configuration” on the first page.
The first six digits of the Ethernet address are the same for all
OkiLAN print servers. The last six digits of the Ethernet address are
unique to each card.
Next, Create and Set Up NetWare
Printer Objects
Use NWAdmin32 or the Pconsole utility to create and set up
NetWare printer objects. Please refer to the Novell documentation
for instructions on how to achieve this.
Then, Configure the Print Server
See “Section 1: Configuring The Print Server” on page 15 for
instructions.
To Next Page
Loading...
Need help?
General
