To Next Page

To Previous Page

Configuration: Configurable Items • 71

SNMP

SNMP-1

Community name used to check incoming SNMP requests.

Displayed as asterisks (***) for security reasons. Up to 15

alphanumeric characters. Default is public

SNMP-2

Community name assigned to outgoing system traps such as cold

start, authentication failure, etc. Up to 15 alphanumeric characters.

Default is public

NOTE

The default setting is underlined.

AdminManager

[Setup] → [OKI Device Setup] → [SNMP] → [Authentic Community]

Web Browser

Not available.

TELNET

[Setup SNMP] → [Authentic Community]

AdminManager

[Setup] → [OKI Device Setup] → [SNMP] → [TRAP Community]

Web Browser

[Network] → [SNMP Trap] → [STEP1] → [Printer Trap Community

Name]

TELNET

[Setup SNMP] → [Trap Community]

Oki C9600hdn Configuration Guide

Other manuals for Oki C9600hdn