222
Printer Menu
Overview
The following tables summarise the Admin Setup, Calibration, Print
Statistics and BootMenu trees.
The remainder of the menus above are described in Appendix B of
the on-line printer User’s Guide.
Table Conventions Used
• The menu trees are given to the lowest menu item level. Typically,
this can be a parameter that can be set by selecting from a range
of values provided or a command that can be executed to display
or print a status or setting value.
• Emboldened values are the defaults.
• Certain menus and items associated with, for example, the
Finisher appear only if the associated hardware is installed or
under certain conditions, as specified.
To Next Page
Loading...
Need help?
General
