Printing from Windows: Using NetBEUI Protocol • 170
Installing NetBEUI Protocol
Windows NT 4.0
1. Click [Start] → [Settings] → [Control Panel].
2. Double-click the [Network] icon.
3. Click the [Protocols] tab.
4. If the [NetBEUI Protocol] is not listed, click [Add].
5. In the "Select Network Protocol" window, click [NetBEUI
Protocol.
6. Click [OK].
Installing NetBEUI Protocol
Windows Me/98
1. Click [Start] → [Settings] → [Control Panel].
2. Double-click the [Network] icon.
3. Click [Configuration Panel].
4. If “Client for Microsoft Networks” is not listed, click [Add].
The "Select Network Component Type” window appears.
5. Click [Protocol] → [Add].
The "Select Network Protocol” window appears.
6. Click [Microsoft] in the list of manufacturers, then select
[NetBEUI] from the list of [Network Protocols].
7. Click [OK].
8. Follow the on-screen instructions to finish the installation.
NOTE
The Windows installation CD-ROM may be required
to complete the installation.
To Next Page
Loading...
Need help?
General
