- 145 -
5. Fax
Scanning a Duplex Document (Duplex Scan)
You can send a duplex document with the ADF.
When you set a document on the document glass, this function cannot be used.
1
Press the (FAX) button on the operator panel.
2
Set a document in the ADF.
3
Press the button to select [Internet Fax] and press the button.
4
Press the or button to select [Scan Setting] and press the button.
5
Press the or button to select [Duplex Scan] and press the button.
6
Press the or button to select the scan method, and then press the
(OK) button.
You can specify [Long Edge Bind] or [Short Edge Bind].
7
Specify a destination.
Entering a Destination E-mail Address
Specifying a Destination from Address Book/Group List
Selecting a Destination Using One Touch Buttons
Selecting a Destination from Transmission History
Searching for a Destination in the LDAP Server
8
Change other settings if necessary, and then press the (MONO) button.
You can change other settings for fax transmissions.
Setting Scanning for Transmission
Sending a Fax via the Internet
Specifying a File Compression Rate (Compression Rate)
You can specify the appropriate compression level.
1
Press the (FAX) button on the operator panel.
2
Set a document in the ADF or on the document glass.
3
Press the button to select [Internet Fax] and press the button.
4
Press the or button to select [Scan Setting] and press the button.
5
Press the or button to select [Compression Rate] and press the
button.
6
Press the or button to select the compression rate, and then press the
(OK) button.
7
Specify a destination.
Entering a Destination E-mail Address
Specifying a Destination from Address Book/Group List
Selecting a Destination Using One Touch Buttons
Selecting a Destination from Transmission History
Searching for a Destination in the LDAP Server
8
Change other settings if necessary, and then press the (MONO) button.
You can change other settings for fax transmissions.
Setting Scanning for Transmission
Sending a Fax via the Internet
To Next Page
Loading...
Need help?
General
