5
Applicable Devices and Device Configuration
For specifications of 24 VDC power supply available for Switching hub, refer to the Switching
Hub W4S1-series Users Manual (Cat. No. 0969584-7).
For specifications of 24 VDC power supply available for Sensor Controller, refer to the
Displacement Sensor ZW-7000 series Confocal Fiber Type Displacement Sensor User’s
Manual (Cat. No. Z362).
Additional Information
The system configuration in this document uses USB for the connection between Personal
computer and PLC. For information on how to install the USB driver, refer to A-5 Installing the
USB Driver of the CJ-series CJ2 CPU Unit Hardware User's Manual (Cat. No. W472).
To Next Page
Loading...
