Omron M1 Series User Manual

4
Parameter List
4-1 List of Monitors by Group ............................................................................. 4-2
4-1-1 Parameter M (Monitor 1) ................................................................................. 4-
2
4-1-2 Parameter W (Monitor 2)............................................................................... 4-30
4-1-3 Parameter z (Alarm Information 1) ................................................................ 4-40
4-1-4 Parameter X (Alarm Information 2) ............................................................... 4-50
4-2 List of Parameters by Group....................................................................... 4-77
4-2-1 Parameter F (Basic Functions)...................................................................... 4-77
4-2-2 Parameter E (Terminal Functions)................................................................. 4-84
4-2-3 Parameter C (Frequency Reference and Analog Input Functions) ............... 4-99
4-2-4 Parameter P (Motor 1 Parameter)................................................................4-112
4-2-5 Parameter H (High Level Functions) ............................................................4-116
4-2-6 Parameter A (Motor 2 Parameter)............................................................... 4-135
4-2-7 Parameter b (Speed Control 3) ................................................................... 4-141
4-2-8 Parameter r (Speed Control 4) .................................................................... 4-142
4-2-9 Parameter J (Applied Functions 1).............................................................. 4-143
4-2-10 Parameter d (Applied Functions 2).............................................................. 4-148
4-2-11 Parameter y (RS-485 Communication Settings) ......................................... 4-159
4-2-12 Parameter S (Via RS-485) .......................................................................... 4-161
4-1
M1 Series Standard Type User's Manual (I669)
4

Omron M1 Series Specifications

General

Input Voltage	200-240V AC
Output Voltage	3-phase 200 to 240 VAC
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit
Communication	RS-485, Modbus RTU
Enclosure	IP20
Cooling Method	Fan Cooled
Operating Temperature	-10°C to +50°C
Humidity	5-95% (non-condensing)
Altitude	Up to 1000m
Frequency Range	0.5-400 Hz
Storage Temperature	-20°C to +65°C