Omron M1 Series User Manual

Precautions for Correct Use
Maintenance and Parts Replacement
• When a cooling fan reaches the end of its service life, replace it.
Product Disposal
Comply with the local ordinance and regulations when disposing of the product.
This mark urges disposal in accordance with the WEEE Directive.
Warning Label
• This product bears a warning label at the following location to provide handling warnings.
• Be sure to follow the instructions.
The appearance differs depending on the capacity of the inverter
.
Precautions for Correct Use
25
M1 Series Standard Type User's Manual (I669)

Omron M1 Series Specifications

General

Input Voltage	200-240V AC
Output Voltage	3-phase 200 to 240 VAC
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit
Communication	RS-485, Modbus RTU
Enclosure	IP20
Cooling Method	Fan Cooled
Operating Temperature	-10°C to +50°C
Humidity	5-95% (non-condensing)
Altitude	Up to 1000m
Frequency Range	0.5-400 Hz
Storage Temperature	-20°C to +65°C