Manual Configuration
This manual is compiled section by section for user’s convenience as follows.
Section Overview
Section 1 Overview This section provides an overview of the 3G3M1 Series
features, standard specifications, and external dimensions
by inverter capacity
.
It also shows the differences of this inverter from conven-
tional inverters for those who use previous models.
Section 2
Design This section describes the installation environment and
wiring methods.
Section 3 Operation and Test Run This section describes the part names and key operations
of the Operator, and the operation method of this product
as well as the test run procedure.
Section 4 Parameter List This section provides the parameter lists that show moni-
tor functions and available parameters for this inverter.
Section 5 Basic Settings This section describes the basic functions such as the
Run command.
Section 6
Vector Control and Applied
Functions
This section describes the vector control and applied
functions characteristic of this inverter.
Section 7 Other Functions This section describes the details of functions not descri-
bed in Section 5 or Section 6.
Section 8
Communications Function This section describes the general-purpose serial commu-
nications functions (Modbus communication).
Section 9 Troubleshooting This section describes how to analyze the cause and take
countermeasures if the inverter fails, and provides trou-
bleshooting for possible troubles.
Section 10 Maintenance and Inspection This section describes the maintenance and periodical in-
spection items.
Appendix This section provides information on derating, capacitor
life curve, compliance with the UL/cUL Standards, and in-
verter selection.
Manual Configuration
2
M1 Series Standard Type User's Manual (I669)
To Next Page
Loading...
Need help?
General
