Prevent lint, paper fibers, sawdust, dust, metallic chips, or other foreign materials from get-
ting into the inverter or from accumulating on the cooling fin.
Not doing so may result in fire or accidents.
Support the inverter case or cooling fin instead of the surface cover during transportation.
Not doing so may result in injury due to the inverter dropping.
The inverter, motor and wiring generate electric noise. Be careful about malfunction of the
nearby sensors and devices. Take noise control measures to prevent them from malfunction-
ing.
Not doing so may result in accidents.
The inverter has an overload protection function. Set the protection level using parameters.
The brake function of the inverter does not provide any holding mechanism. Provide a sepa-
rate holding brake if necessary.
Not doing so may result in injury.
Comply with the local ordinance and regulations when disposing of the product.
Not doing so may result in injury.
UL and cUL compliance is subject to conditions. Strictly observe the conditions listed in the
instruction manual or user's manual.
Not doing so may result in fire or accidents.
Safety Precautions
22
M1 Series Standard Type User's Manual (I669)
To Next Page
Loading...
Need help?
General
