Omron M1 Series User Manual

Parameter
No.
Function name Data Default data Unit
P55/A55
1st Motor Torque Current
under Vector Control/Torque
Current for 2nd V
ector Con-
trol
0.00 to 2000 A
Dependent
on capacity
A
P56/A56
1st Induced Voltage Factor
under Vector Control/
Induced Voltage Factor for
2nd V
ector Control
50 to 100%
Dependent
on capacity
%
P65
1st PM Motor d-axis Induc-
tance Magnetic Saturation
Correction
0.0 to 100%
(100.0%=No magnetic saturation)
999 (Factory default)
999 %
P74
1st PM Motor Reference
Current at Starting
10 to 200%
(Based on the rated current of the mo-
tor)
80 %
P85
1st PM Motor Flux Limitation
V
alue
50.0 to 150.0%
999 (Factory default)
999 %
P87
1st PM Motor Reference
Current for Magnetic Pole
Detection
0 to 200%
(Based on the rated current of the mo-
tor)
0 %
6 Vector Control and Applied Functions
6-10
M1 Series Standard Type User's Manual (I669)

Omron M1 Series Specifications

General

Input Voltage	200-240V AC
Output Voltage	3-phase 200 to 240 VAC
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit
Communication	RS-485, Modbus RTU
Enclosure	IP20
Cooling Method	Fan Cooled
Operating Temperature	-10°C to +50°C
Humidity	5-95% (non-condensing)
Altitude	Up to 1000m
Frequency Range	0.5-400 Hz
Storage Temperature	-20°C to +65°C