Omron NJ Series User Manual

8-53
8 CPU Unit Functions
NJ-series CPU Unit Software User’s Manual (W501)
8-6 Event Logs
8
8-6-2 Detailed Information on Event Logs
 Clearing Event Logs from the Sysmac Studio or an HMI
You can clear the event logs from the Sysmac Studio or from an NJ-series-compatible NS-series PT.
You can clear the Controller event log and user-defined event log separately.
Precautions for Correct UsePrecautions for Correct Use
If you need to delete event log in the CPU Unit from the Sysmac Studio or HMI, make sure you
do not need any of the event information before you delete the event log. You may have over-
looked some important information and observation level Controller events or user-defined
events. Always check for these before you delete an event log.
 Clearing Event Logs with the Clear All Memory Operation
When you perform the Clear All Memory operation for an NJ-series CPU Unit from the Sysmac Stu-
dio, you can select whether to clear the event logs.
You can use the Sysmac Studio or an NJ-series-compatible NS-series PT to export the displayed event
log to a CSV file.
Clearing Event Logs
Exporting Event Logs

Omron NJ Series Specifications

General

Program Capacity	Up to 128 MB
SD Card Slot	Yes
Power Supply Voltage	24 VDC
Motion Control	Yes
USB Ports	1
Operating Temperature	0°C to 55°C
Communication Interfaces	Ethernet/IP, EtherCAT, USB
Safety Function	Optional
Storage Temperature	-20°C to 75°C
Communication Ports	USB
Dimensions	Varies by model
Weight	Varies by model