Omron NJ Series User Manual

8-55
8 CPU Unit Functions
NJ-series CPU Unit Software User’s Manual (W501)
8-6 Event Logs
8
8-6-4 User-defined Events (User-defined Errors and Information)
These errors and information are defined by the user. You can use instructions to create them.
 User-defined Errors
These errors are defined by the user. Use the Create User-defined Error (SetAlarm) instruction to
create user-defined errors. When this instruction is executed, a user-defined error is recorded in the
event log.
The corresponding system-defined variable changes to TRUE. User-defined errors are not reset
when the operating mode changes.
 User-defined Information
User-defined information is user-defined notification information. This information does not indicate
errors. Use the Create User-defined Information (SetInfo) instruction to create user-defined informa-
tion. When this instruction is executed, user-defined information is recorded in the event log.
8-6-4 User-defined Events (User-defined Errors and Information)
Introduction
SetAlarm
Event Setting Tables
User-defined error status
System-defined Variables
User-defined events
Event logs
An event occurs.
Program
Instruction
Event code
Event name
Failure X
Level
100 User fault level 1
Group
Control A (001)
Details

Omron NJ Series Specifications

General

Program Capacity	Up to 128 MB
SD Card Slot	Yes
Power Supply Voltage	24 VDC
Motion Control	Yes
USB Ports	1
Operating Temperature	0°C to 55°C
Communication Interfaces	Ethernet/IP, EtherCAT, USB
Safety Function	Optional
Storage Temperature	-20°C to 75°C
Communication Ports	USB
Dimensions	Varies by model
Weight	Varies by model