Omron NJ Series User Manual

8-63
8 CPU Unit Functions
NJ-series CPU Unit Software User’s Manual (W501)
8-7 Changing Event Levels
8
8-7-3 Procedure to Change an Event Level
2 Click the Event Level Settings Button.
A list of the events for which you can change the event level is displayed.
3 Change the levels of the required events in the Level column.
Precautions for Correct UsePrecautions for Correct Use
If you change an event level on the Sysmac Studio and download the event level setting to the
Controller when the event already exists on the Controller, the event will be reset when the down-
load is started. If the same event occurs again while the download is in progress, the Controller
will operate according to the previous event level. If the same event occurs after the download is
completed, the Controller will operate according to the new level.

Omron NJ Series Specifications

General

Program Capacity	Up to 128 MB
SD Card Slot	Yes
Power Supply Voltage	24 VDC
Motion Control	Yes
USB Ports	1
Operating Temperature	0°C to 55°C
Communication Interfaces	Ethernet/IP, EtherCAT, USB
Safety Function	Optional
Storage Temperature	-20°C to 75°C
Communication Ports	USB
Dimensions	Varies by model
Weight	Varies by model